5 Mistakes You Need to Avoid When You Are Upgrading Your Lighting to LED

LED lighting is more efficient and can save one a lot of money on the long term, so people are upgrading their fixtures to LED. These lights have a long lifespan, which makes them attractive for both house owners and business owners, who don’t need to replace the bulbs as often as they would replace traditional light bulbs. Upgrading to these efficient bulbs comes with a lot of advantages, but you can easily make a number of mistakes which can decrease the advantages of LED lighting.

LED light distribution is different 

When you are upgrading your bulbs to LED American lighting you can easily stumble upon a number of problems when it comes light distribution. Depending on where you want to install the LEDs, you might discover the new lights fail to illuminate the areas you need to be well-lit. Most LEDs provide a highly specific stream of light. You can try to invest in A-shaped LED bulbs, which are omnidirectional and can perform better when they are used to replace traditional bulbs.

The new lights are too dark 

One of the most common problems people encounter when they upgrade to LEDs is that they are too dark. This can be a big problem, especially since many people try to buy more powerful LEDs, hoping they will provide enough light. To avoid this problem, you should compare the Lumens of your traditional bulbs with the Lumens of the new LED lights. Comparing the wattage is also a good starting point, but the Lumens are going to give you a more reliable insight on the brightness of your new light bulbs.

The color of the light is different 

LED lighting can spread cold or warm light, depending on the Kelvin number. To match the color of your current light bulbs you can check the Kelvin note on the package of LED bulbs. Incandescent bulbs have around 2400-2700K and halogen bulbs have 3000-3200K. Compare these numbers with the ones on your new LED lights.

LEDs need new dimmers 

If you have light dimmers, your new LED tubes or bulbs might not be compatible with them. For example, if you install LED light bulbs on a system which had a standard incandescent dimmer, you might notice your new lights are flashing, buzzing or flickering. Depending on your LEDs and dimmer, you might need to replace the dimmers with LED compatible ones to enjoy your new lights.

The new lights modify the colors 

After replacing the old light bulbs with BAA LED tubes you might notice a change in the colors. This is due to the color rendering index, CRI, which determines how accurate the LED lights display the color, compared to the natural daylight. The higher the CRI number, the more accurate is the color displayed by the light bulbs. Incandescent and halogen bulbs have a CRI of 100, which can’t be matched by LEDs. However, you can find LEDs with 90 CRI, which displays the colors as naturally as possible.